HDMI 2.0 Fiber Extender Kit, Single Mode Operation Manual
MuxLab © 2022 5 94-000971-A/SE-000971-A
5.
Specifications
Technical
HDMI compliance
HDMI 2.0a
HDCP compliance
HDCP 2.2
Video bandwidth
Single-link 594MHz [18Gbps]
Video support
HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
Audio support
Surround sound [up to 7.1ch] or stereo digital audio
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Human body model
±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB stack-up
4-layer board [impedance control — differential 100Ω; single
50Ω]
IR pass-thru
Bi-directional
RS-232 support
Yes
Input Ports
Transmitter [TX] 1x HDMI, 1x 3.5mm
Receiver [RX] 1x Fiber, 1x 3.5mm
Output Ports
Transmitter [TX] 1x Fiber, 1x 3.5mm
Receiver [RX] 1x HDMI, 1x 3.5mm
In / Out Ports
Transmitter [TX] 1x RS-232, 1x USB
Receiver [RX] 1x RS-232, 2x USB
HDMI source control
Controllable via IR pass-through from RX to TX with IR
extenders
HDMI connector
Type A [19-pin female]
USB connector
Type A
3.5mm connector
Transmitter [TX] IR receiver / IR blaster
Receiver [RX] IR receiver / IR blaster
Mechanical
Housing
Metal enclosure
Unit Dimensions (DxWxH)
Transmitter [TX] 4.9" x 4.4" x 1.1" (125mm x 112mm x 28mm)
Receiver [RX] 4.9" x 4.4" x 1.1" (125mm x 112mm x 28mm)
