HDMI/HDBT 1x4 Splitter
Installation & Operation Manual
© MuxLab Inc. 2016
16
output
–u
<unit #>
–p
<port #> <state>
Description:
Set output state
Arguments:
<Unit # >: 0 to 15
<port # >: 1 to 5 (1:HDMI, 2-5:HDBT)
<state>: on or off
Example:
Turn off video on HDBT port 4
output
–u 0 –p 5 off
edidupdate
–u
<unit #>
-p
<predefined edid>
Description:
Update the specified predefined EDID values via the serial port
Arguments:
<Unit # >: 0 to 15
<predefined edid>: 1, 2, 3, 4, 5 (1:1080p 2D, 2:1080p 3D, 3:720p 2D,
4:720p 3D, 5:DVI 1920x1080)
Example:
Update the specified predefined EDID
“1080p 3D” via the serial port
edidupdate
–u 0 –p 2
(Will read the EDID binary file from the serial port)
Note:
To control the HDMI/HDBT 1x4 Splitter via the RS232 port, the communication
protocol parameters should be configured as follows: Baud rate: 9600; Data bit: 8; Stop
bit: 1; Parity bit: none.