Dante Two Column Speakers PoE, 60W Operation Manual
MuxLab © 2021 9 94-000966-A/SE-000966-A
8.
Troubleshooting
The following table describes some of the symptoms and possible solutions regarding the Dante two
Column Speakers PoE, 60W.
symptom
Probable cause
Possible solution
No Speaker found
•
The Speaker is not
connected to the
network.
•
The Speaker is not
powered on correctly.
•
The Speaker is
connected to a
different Subnet
Check that the network cable
is properly connected to the
Speaker.
Verify the Ethernet Switch
being used supports 60W
PoE power, or use a 60W
PoE Injector.
Make sure you are on the
same subnet as your Speaker.
