Muton ValuejetVJ-1604, Maintenance Manual

Page: 154 / 422

4 Parts Replacement VJ-1604 Maintenance Manual
Rev.-00 4-112
4.8.8 Replacing Damper Assembly L_Assy
CAUTION
• When connecting and removing the FFC type cables to/from the MAIN board assembly
connectors, always pull or push the cables perpendicularly.
Pulling or pushing them slantwise may damage/short/break the terminals in the
connectors, causing a breakdown of the on-board devices.
The cables can be connected or removed up to 5 times.
1. Perform ink discharge operation to discharge ink entirely from the ink paths.
"5.7.8 HeadWash Menu" p.5-40
2. Remove the print head cover.
"4.8.7 Removing Print Head Cover" p.4-110
3. Remove the screws (3 pieces) that retain the damper guide plate.
4. Remove the damper guide plate.
5. Remove the joint screws (2 pieces) of the related color.
6. Remove the head tubes (2 pieces) of the related color.
7. Remove the damper assembly L (2 pieces) of the related colors.
8. Replace the damper assembly L_Assy.
No. Part name
1 Damper guide plate
2 Screws that retain the damper guide plate
(pan-head screw with spring washer and flat washer M3
×
6)
3 Ink tube
2 1
3