Set 1: User Type 71
Steps
1.
Print a confirm pattern and check it for printing errors.
2.
Print "Rough adjustment pattern" and look for a place that is properly adjusted in the printing results of print
head 1.
•
If you selected "Adj. Print 2: Custom", select "ALL" or "A" to "F".
•
The number printed under the pattern without alignment errors is the adjustment value.
3.
Enter the correction values.
4.
Follow the same procedure to adjust print head 2.
5.
Print "Fine adjustment pattern" and look for a place that is properly adjusted in the printing results of print
head 1.
•
If you selected "Adj. Print 2: Custom", select "ALL" or "A" to "F".
•
The number printed under the pattern without alignment errors is the adjustment value.
6.
Enter the correction values.
7.
Follow the same procedure to adjust print head 2.
1. Confirm pattern
• Press the [Enter] key to carry out printing.
• Check the printing results. If there are shifting problems, proceed to rough adjustment pattern printing.
• In the picture below, there are misalignments.
Note
Because this printer has 2 Print heads, 2 rows of confirmation pattern will be printed.
Print Head 1
・・・
Print Head 2
・・・
No Shifted
Shifted
Shifted