MUTOH VJ-1638WX, Operation Manual

Page: 157 / 380

VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL Before using
Print quality adjustment 157
3.6.2 Custom print quality adjustment
Perform adjustment for all patterns (A to F). All print modes will be adjusted.
This menu consists of the following menus.
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.6.2.1 Custom confirmation pattern
2. Perform rough adjustment when the degree of misalignment is big.
3.6.2.2 Custom rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.6.2.3 Custom micro adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
• Perform adjustment for A to F patterns if they are misaligned.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.6.2.1 Custom confirmation pattern
4. If it has not been adjusted yet, return to Step 2.
NOTE
• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
• In adjustment patterns, there are Adjust pattern ALL where all patterns will be adjusted and
Individual Adj. pattern where the patterns A to F can be adjusted individually.
Menu name Description Reference
Custom confirmation pattern Print out the confirmation patterns (A to F)
and check the degree of misalignment.
3.6.2.1 Custom confirmation
pattern
Custom rough
adjustment
pattern Rough
PatternALL Perform this when the degree of misalignment
is big. All confirmation patterns (A to F) will
be adjusted.
3.6.2.2.1 Rough Pattern ALL
Individual Rough
Adj. pattern Perform this when the degree of misalignment
is big. One of the confirmation patterns (A to
F) will be adjusted.
3.6.2.2.2 Rough Pattern A to
F
Custom micro
adjustment
pattern Adj. PatternALL Perform this when the degree of misalignment
is small. All confirmation patterns (A to F)
will be adjusted.
3.6.2.3.1 Fine Pattern ALL
Individual Adj.
pattern Perform this when the degree of misalignment
is small. One of the confirmation patterns (A
to F) will be adjusted.
3.6.2.3.2 Fine Pattern A to F