MUTOH VJ-1638WX, Operation Manual

Page: 169 / 380

VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL Before using
Print quality adjustment 169
3.6.2.2.2 Rough Pattern A to F
Print one adjustment pattern from A to F and register the set value.
The following describes how to adjust pattern A only.
1. Display the Custom Adjust Print menu on Operation panel in the same way as Step 2 of
3.6.2.1 Custom confirmation pattern .
2. Press the [+] key or [-] key on Operation panel to select “Adj.3: RoughPatternA”.
3. Press the [Enter] key on Operation panel.
• For VJ-2638X/1938X/1638X, “Warming Up Skip ->E” is displayed on Operation panel.
(This is not displayed for VJ-1938WX/1638WX since it does not perform warming up.)
CAUTION
• While “Warming Up” is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
NOTE
You can start printing during warming up.
4.4.7 Starting printing during warming up (VJ-2638X/1938X/1638X)