2
1
No.
Name
1
Roll media
No.
Name
2
Scroller
9. Press and hold the front edge of the roll media and
wind it back with the scroller to remove a media bend
or slant.
10. Return the media loading lever to the front and
close the front cover.
11. Press the [+] key or [-] key on the operation panel to
select the type of the loaded media and press the [En-
ter] key.
This confirms the media type.
The operation panel displays "Media Initial", and
media initial operation starts.
After the media initial operation is completed, the
operation panel displays "Ready to Print", and the
display enters normal status.
12. Wind back the roll media with the scroller to remove
a media bend.
The media loading is complete.
11 Checking printing conditions
Check the condition of the print head after the ink re-
plenishment.
1. Turn ON the printer and load the roll media.
8 Loading the roll media
2. Confirm that the printer functions normally.
3. Press the [<] key on the operation panel for two
seconds or more.
Nozzle check printing starts.
4. Check the sample print for blurred or missing
parts in the check pattern.
5. If the nozzle check result indicates that there is a
problem such as mentioned above in the check pat-
tern, clean the head.
Press and hold the [Cleaning] key on the operation
panel for two seconds or more.
The operation panel displays "Cleaning **%".
Head cleaning starts.
6. Perform nozzle check again and check the condi-
tion of the print head.
7. Perform nozzle check again and check the condi-
tion of the print head.
12
Manual composition
This product includes the following three manuals.
Installation Manual (this manual)
This manual explains the procedures of unpacking,
installing, and the basic set up.
Using a Manual CD-ROM
This manual explains the procedures of viewing
Quick Reference and Operation Manual which are
contained in the CD-ROM.
Product Activation Guide
This manual explains the procedures when the
printer starts up first time.
Quick Reference (CD-ROM)
Quick Reference is excerpts of functions used daily.
Operation Manual (CD-ROM)
The Operation Manual explains the basic installa
tion, daily use and applicable functions.
2
2
1
TIP
Quick Reference and Operation Manual are con-
tained in the same CD-ROM.
Quick Reference is in PDF format. Adobe Acrobat
Reader 5.0 or above is required to view it.
Adobe Reader is available for free download at
Adobe's website.
The Operation Manual of this product is created
with the HTML format and can be viewed using
browsers such as Internet Explorer.
1
2
2
No.
Name
1
Roll media
No.
Name
2
Scroller
No.
Name
1
Media loading lever
No.
Name
2
Front cover
NOTE
If one time of head cleaning was not enough to re-
move blurred or missing parts in the check pattern,
perform powerful cleaning.
If those problems above were not improved after a
few times of head cleaning, refer to the Operation
Manual "7 Troubleshooting" and perform required
procedures.
