MUTOH VJ-1304, Quick Reference

Page: 21 / 114

VJ-1304 QUICK REFERENCE 2 Product overview
2-3
2 Product
overview
2.1.2 Rear section
8 Pressurizing rollers Installed inside of the front cover.
Press and hold the media when printing.
9 Platen Installed inside of the front cover.
The heater (platen heater) to dry ink is installed.
No. Name Function
1 AC inlet Used for connecting the power cable.
2 Network interface connector Connects a network interface cable.
3 USB connector Not used for this printer.
4 Scroller receiver Set the scroller when roll media is used.
5 Media feed slot Used for feeding media.
6 Ink cartridge slot Insert the ink cartridge.
7 Media guide Used for feeding media smoothly when the media is set or printed.
The heater (pre heater) to warm media is installed.
8 Waste fluid tank Used for collecting waste ink discharged from the printer.
9 Waste fluid valve Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.
No. Name Function
1
4
2 3
K
C
6
M
Y
5
7
4
8
9