MUTOH ValueJet VJ-628X Operation Manual Download

Page: 62 / 90

62 Cleaning of print head circumference

Cleaning period:

• Weekly

• When print blurring and dot missing remain after head cleaning is done.

Preparation:

• Cleaning stick

Cleaning of print head circumference

Important!

During cleaning, please note the followings.

• Use a cleaning stick in dry condition. If moisten with water or solution, it can cause damage to the print head.

• Do not touch the tip of a cleaning stick with fingers. If sebum is adhered, it can cause damage to the print head.

• Do not reuse a cleaning stick. Dusts can adhere causing damage to the print head.

• Standard cleaning time should be within 5 minutes. If it takes longer, the stick can dry causing damage to the print head.

Procedure

[1]

Display the Printing Preferences screen of printer driver.

"Displaying the Printing Preferences screen of printer driver" on page 10

[2]

Click the [Maintenance] tab under the [Utility] tab.

[3]

Click [CR Maintenance].

• The MSM remote panel opens.

Note

MSM can be launched directly.

"Launching MSM" on page 11

Summary of Contents for ValueJet VJ-628X



























































































Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands

MUTOH ValueJet VJ-628X, Operation Manual

Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands