MUTOH ValueJet VJ-628X Operation Manual Download

Page: 10 / 90

10 Displaying the Printing Preferences screen of printer driver

Displaying the Printing Preferences screen of printer driver

[1]

Windows 10

Click [Start], [All Apps], [Windows System], then [Control Panel].
In the screen that appears, click [Devices and Printers].

Windows 8 / Windows 8.1

Display the charm bar on Desktop, and click [Settings]. Click [Control Panel] - [View devices and printers].

Windows 7

Click [Start] - [Devices and Printers].

[2]

Right click the “MUTOH VJ-628” icon and click [Printing preferences].

• The “Printer Configuration” dialog box opens only at the first time.

• The Printing Preferences screen of printer driver opens from the

second time.

[3]

Select the ink color configuration and click [OK].

• After clicking, the Printing Preferences screen of printer driver

opens.

Note

The screen on the left is for VJ-628.

Screens differ depending on the printer model you are using.

"Screens for the software used in this manual" on page 2

VJ-628

VJ-628X

Summary of Contents for ValueJet VJ-628X



























































































Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands

MUTOH ValueJet VJ-628X, Operation Manual

Search results

Summary of Contents for ValueJet VJ-628X

Reviews:

Related manuals for ValueJet VJ-628X

Brands by name

Popular brands