MUTOH ValueJet VJ-1624WX Operation Manual Download Page 264

Page: 264 / 358

5 Panel setup menu

VJ-1624X/1624WX/1924WX OPERATION MANUAL

264

5.7 Display menu

5.7

Display menu

Sets the language and unit displayed on LCD monitor of Operation panel.

5.7.1

Language menu

Sets the language used in the menu items displayed on LCD monitor of Operation panel.

Setup item

Setting

Description

Display

Language

Sets the language used in the menu items displayed on LCD
monitor of Operation panel.

5.7.1 Language menu

Temperature

Sets the unit of temperature display.

5.7.2 Temperature menu

Length

Sets the unit to display the length.

5.7.3 Length menu

Remain Ink

Sets whether to display the ink level indicator.

5.7.4 Remain Ink menu

—

• [Enter] key: shifts to the selected menu.
• [Cancel] key: cancel the set value and return to the previous

menu.

5 Panel setup menu

Setup item

Setting

Description

Language

Displays the menu items in English.

Japanese

Displays the menu items in Japanese.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.7 Display menu

Summary of Contents for ValueJet VJ-1624WX







































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

MUTOH ValueJet VJ-1624WX, Operation Manual, Page: 264 / 358

Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews: