Tips for Handling Thin Transfer Paper
43
Using thin transfer paper
STEP1 Setting the pressure on the multi-level pinch rollers
Reduce the pressure. Cancel the pressure mode on both
sides of media or areas where cocking is likely to occur
STEP2 Vacuum fan setting
If the suction force is too strong, the media feeding will be jammed,
and it will cause cockling. The vacuum fan force should be reduced.
-
In reverse, the “High” modes are effective for thick and firm papers,
because this setting can neutralize the natural substrate’s memory curl and
pull it flat.
STEP3 Media feed flange
Exchange standard to high torque media flange* to remove slack
occurred from the roll to grid entrance
STEP4 Take-up unit media tension control
•
If the torque setting is stronger than the pressure, the media is
always wound forcibly, so reduce the torque force
•
Since the media weight is changed by the volume of take-up,
the setting should be changed according to the volume.
Since optimal setting on each step may be affected by other settings, review the previous steps.
STEP3
Media feed flange
STEP2
Vacuum fan
STEP1
Multi-level pinch rollers
STEP4
Take-up unit media tension control
Media feeding flow
*High torque media feed flange is optional.
Summary of Contents for 1682WR
Page 1: ...64 Wide Format Dye Sublimation Printer Product Guide Apr 2021 Version 1 0...
Page 7: ...Application Possibilities Custom Apparel 7 1 Personalised clothing Fast fashion Blouses Shirts...
Page 40: ...Extended Info 40 for Mutoh Certified Distributors only...
