K
Using a small Phillips screwdriver, push in the center post on the plastic dowel pin and release the dowel pin from the door panel
(G)
. Carefully pry on the lower
outboard corner of the door panel using a small plastic pry bar
(H)
. Continue prying around the door panel until it unsnaps from the door frame. Lift up and pull door
panel out a few inches away
(I)
. Disconnect tweeter and wiring connection. Remove door panel and set it aside. Disconnect mirror harness
(J)
. Secure the mirror
housing with one hand, remove the (3) nuts holding the mirror housing to the door frame using a 11mm socket
(K)
.
WARNING: Not securing mirror housing with
one hand before loosening the nuts could cause the mirror housing to fall and become damaged.
Carefully remove mirror housing from door frame and set mirror
housing on a cloth covered surface.
H
J
DOOR PANEL & MIRROR HOUSING REMOVAL CONTINUED
G
I
4
