Mutec SMART MERGE Operating Manual Download Page 13

������������

�� � � � � � �

�� � � � � � �

�� � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

��

���������������������������������������������

13

  

S/PDIF INPUTS

Interface 

4 x coaxial (Cinch/RCA), unbalanced, input impedance 75 

, 200mV – 2V, IEC 60958

 

1 x optical, Toshiba Toslink

TM

, EIAJ RC-5720, IEC 60958

Resolution

16 – 24 Bits

Lock range

Every audio clock rate from 32.0 kHz to 108.0 kHz , fully varispeed compatible

AES/EBU INPUT

Interface

1 x XLR female, transformer balanced, input impedance 110 

, 200mV – 7V, AES3 – 1992 (R1997)

Resolution

16 – 24 Bits

Lock range

Every audio clock rate from 32.0 kHz to 108.0 kHz , fully varispeed compatible

AES/EBU OUTPUT

Interface

1 x XLR male, transformer balanced, 4 Vpp @ 110 

, output impedance 110 

, AES3 – 1992 (R1997)

Resolution

24 Bits

Frequency range

Every audio clock rate from 32.0 kHz to 108.0 kHz, fully varispeed compatible

Digital level

max. – 0.5 dBFs

WORD CLOCK INPUT

Interface

1 x BNC female, unbalanced, 200 mV – 5.0 V, input impedance 75 

 (switchable)

Lock range

Every audio clock rate from 32.0 kHz to 108.0 kHz and 8.0 MHz to 25.0 MHz (for ProTools

™

), fully 

varispeed compatible

WORD CLOCK OUTPUT

Interface

1 x BNC female, unbalanced, 3.0 Vpp @ 75 

, output impedance 50 

Frequency range

Every audio clock rate from 32.0 kHz to 108.0 kHz and 8.0 MHz to 25.0 MHz 
(for ProTools

™

), fully varispeed compatible

SIGNAL PROCESSING

DynamicAutoLeveling (DAL) 32 bits floating-point, 32.0 kHz – 108.0 kHz
Sampling rate conversion

24 bits, 32.0 kHz – 108.0 kHz

Format conversion

24 bits, 32.0 kHz – 108.0 kHz

EXTERNAL SYNCHRONIZATION

Formats

Word Clock, 32.0 kHz – 108.0 kHz
Word Clock x 256 (for ProTools

™

 systems)

AES/EBU 3 / 11 + S/PDIF coaxial (clock extraction)

ANALOG MONITORING

Interface

1 / 4 inch phone jack, unbalanced

Resolution

24 Bits, 128 times over sampled high-performance delta sigma DAC 

Frequency range

20.0 Hz – 20.0 kHz

Output level

max. 150 mW

POWER SUPPLY

Type

Internal, transformer based power supply

Input voltage

115 V / 230 V (switchable from outside), 50 Hz / 60 Hz

Power consumption

max. 10 W

SYSTEM UNIT COVER

Cover size / material / color

196 x 42 x 156mm (W x H x D), aluminium 1mm, black

Front panel size / material

198 x 44 x 2mm (W x H x D), aluminium

Weight

~ 1000g

OPTIONS

MW-01/19

Set of rack mounting angels for one device, ordering no. 8040-005

MW-02/19

Set of rack mounting angels for two devices, ordering no. 8040-010

Optical cables

Different lenghts between 0.5 m – 20.0 m

 

Technical data

Summary of Contents for SMART MERGE















Reviews: