background image

License

The  content  of  the  present  manual  has  been  created  by  Olivier  Gillet  (Mutable 
Instruments)  and  Hannes  Pasqualini  (papernoise) and  is  available  under  a  CC-BY-SA  - 
Creative Commons 3.0 license (

http://creativecommons.org/licenses/by-sa/3.0/)

This  manual  was  adapted  from  the  original  version  available  at

  http://www.mutable-

instruments.net 

. All text content is made by Olivier Gillet.

The  graphics used to build this manual were  shared by  Olivier Gillet.  The  front and back 
pannel graphics  were  made  from  scratch by  Igor  Cristo,  who  is also  responsible  for  all 
graphic and text editing in this document.

Image  manipulation  respected  Mutable  Instruments’  orientations  and  there  was  no 
change made on the brand logo or any other content within this manual. You can have full 
access to the Mutable Instruments’ style guide by requesting it to Olivier Gillet.

Please,  while  distributing this,  include  this page  and give  credit  to  the  right  people.  It’s 
always  nice  to  contribute  with this  amazing DIY  community.  If  you  have  any  suggestion, 
please let me know via 

[email protected]

 .

Cheers!

Igor Cristo - 

http://www.youtube.com/synthway

Olivier Gillet - 

http://www.mutable-instruments.net

Hannes Pasqualini - 

http://www.papernoise.net

Summary of Contents for ambika











































Reviews: