Musway DSP68 Manual Download Page 8

8

ENGLISH

HIGH LEVEL INPUT 

Connect here the amplified speaker outputs coming from the head unit by using the enclosed 12 pole 

multipolar connector.

BT

This USB input is suited for an external Bluetooth

®

 dongle with wireless audio streaming function with/

or adjusting the DSP by an APP through a smart phone/mobile device. 
Check the website 

“www.musway.de”

 for more information or ask your car audio retailer.

6

USB

This USB input is suited for the connection with a PC/laptop computer to manage the functions of the 

MUSWAY DSP software to set-up the DSP functions of the device. The connection is USB 1.1/2.0/3.0 

compatible. For downloading the software please visit 

“www.musway.de/dsp”

.

2

3

3

DESCRIPTION OF OPERATION

2

4

6

7

5

OPT IN

This devices accepts through its Optical input PCM stereo signals up to 96 kHz / 24 bit sampling fre-

quency rate. Multi-channel signals coming from audio/video sources (such as the audio tracks of a film 

in DVD) can not be reproduced. Connect a fiber optic cable with a TOSLINK connector.

DRC

This input is suited for an external MUSWAY digital remote controller. Check the website 

“www.mus-

way.de”

 for more information or ask your car audio retailer.

5

4

POW ON SEL

The device can be turned on/off by using the following methods: 
SPK:   Slide the switch into position SPK, if you want to turn on/off the device through  

 

the CH1 input channel of the high level speaker inputs and its Auto Turn-On function.

REM:   Slide the switch into position REM, if you want to turn on/off the device through the REM IN  

 

and a turn-on signal from head unit/car stereo in low level operation.

CAUTION:

 Do NOT use the High Level Input and the Line Input at the same time.

7

Summary of Contents for DSP68

























Reviews: