background image

Federal Communications Commission (FCC) Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. 

 

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generate, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. 

 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one of the following measures: 

 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1)This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation. 

 

FCC Caution: Any changes or modifications not expressly approved by the party 

responsible 

for compliance could void the user’s authority to operate this equipment. 

 

RF exposure warning 

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. 

The equipment must not be co-located or operating in conjunction with any other 

antenna or transmitter. 

Summary of Contents for UM018









































Reviews: