5. Change Password
At the main interface, double click a Camera and then enter into the following:
The default login as administrator username is admin, password is 123456. In the
Password box, enter the password you want to update, click on settings.
6. Wi-Fi Setup
1) Double click an IP Camera from the device list; go to the Wireless LAN
Settings.
2) Scan the WiFi signals, two more times until you find the signals.
3) Choose the SSID you want to use.
4) Make sure all the parameters are the same with your router, input the WIFI
network key.
5) Click Submit, then your camera will reboot by automatically. Wait a moment,
and disconnect the net cable carefully, then the camera can work by Wi-Fi
connection.
7. WPS Connection
By WPS, user can establish WiFi connection for the IPC directly. This requires
that your router has WPS function. If you are not sure about this, please refer to
your router user manual.
Press the Reset button (at the bottom of the IP Camera) and the WPS button of
your router at the same time for 5 seconds, and then release them. The router’s
WPS indicator will flash, which means it is matching the configuration. After the
match succeeds, the IP Camera will restart automatically.
