www.mustangav.com
Mustang Screen Limit Switch Adjustment
This is the power end of the case. The power cable
connection looks different than yours but the location
and function of the limit switches will remain the
same. You can see a rubber plug just above the word
Pass on the casing.
Another picture of the two hexhead
bolts.This shot is from underneath
where the screen travels out of the
casing. These are nylon so do not
put too much tension on them. Also,
it is best to start with very small
adjustments like 1/8 turn or less to
begin. You do not want to allow too
much over-travel in either direction
as it could damage the screen.
This photo shows the plug removed. It will give you
access to the yellow hex head bolt. Again, the color
of the bolt is possibly different on your screen but the
placement and function are identical.
