work properly as it is not getting enough effective heat.
The stove fan is applicable for flue size range diameter 115-200mm.
Example of an optimal location for the stove fan on the flue pipe.
Upon settling the stove fan into position on the flue pipe, use the
metal clamp and fasten it with the end clip.
The magnetic force of stove fan is dependent on the material of the
flue-pipe. It works best with carbon steel flue pipe. For stainless steel
flue pipe types, the included clamps will keep it in position.
It is advisable for safety reasons, to use the metal clamp when install-
ing the stove fan despite whether there is a magnetic force or not.
How to use the metal clamp.
1. Use a screw driver to turn the screw anticlockwise to release the
metal clamp.
2. Fasten the metal clamp around the stove fan and onto the flue-pi-
pe. Insert the end of the metal clamp into the screw.
3. Use the screw driver to turn the screw clockwise. The metal clamp
will tighten up while you keep turning the screw. Fasten the metal
clamp until the stove fan is in position on the flue-pipe tightly. Neat-
ly place the loose end behind the stove fan so it is not visible.
Do not install the stove fan while the heater is operating and flue pi-
pe is hot.
610383_kaminapuhallin_savuputkeen_EN-FI-SV-ET-LV-LT-RU_ko.indd 3
610383_kaminapuhallin_savuputkeen_EN-FI-SV-ET-LV-LT-RU_ko.indd 3
24.6.2021 11.44.06
24.6.2021 11.44.06
