10
MUSTANG SURVIVAL
/
MD3157
4) Squeeze the sealing ring to elongate it and remove the inflator
body through the sealing ring (Fig. 10).
5) Dispose of the used inflator body (Fig. 11).
RED = TRASH
Red Indicator
Trash
FIGURE 11
Red Indicator
Inflator Body
Sealing Ring
FIGURE 10
REMOVE CYLINDER
6) Check that the new inflator body indicator is green. Insert the new
inflator body with CO
2
cylinder pointing upward inside the life
jacket (Fig. 12). Let the sealing ring rest on the adapter around the
four lugs.
7) Now check the new manual/automatic cap as follows (Fig. 13)
1. Is the single point status indicator showing green?
2. Is the expiry date OK?
If YES is the answer to both questions, then proceed as follows. If the
answer is NO to either question, get a new cap.
Single Point
Indicator
Water
Inlet
Valve
FIGURE 13
Green Indicator
CAUTION:
Do not turn
the center shaft
FIGURE 12
INSERT CYLINDER
CHECK CAP