musikelectronic geithain TS36KSP, Instructions For Installation And Use Manual, Page: 15 / 32

BASIC INFORMATION
13
musikelectronic geithain GmbH TS 36SP / TS 36KSP
Correction of damages to the coating / changing the front foam
Although the used coating is highly resistant, the use of protective covers or flight cases is
recommended to avoid damages during transport. If damages to the coating occur despite these
precautions, the coating could be restored with acrylic paint in the same RAL colour as the speaker.
Power-cord protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon them or against them, paying particular attention to cords and plugs, and the point
where they exit from the device.
Lightning
For added protection of the product during lightning storms, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due
to lightning and power-line surges.
Interference of external objects and/or liquids with the appliance
Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the device.
Connecting
When you connect the device to other equipment, turn off the power and unplug all of the equipment
from the supply source. Failure to do so may cause an electric shock and serious personal injury.
Read the user‘s manual of the other equipment carefully and follow the instructions when making
the connections.
Sound level
Reduce the level to minimum before you turn on the speaker to prevent sudden high levels of noise
which may cause hearing or speaker damage.
Power failure
In case of power failure while the amplifier is powered up, it will automatically restart as soon as the
mains supply is restored. All settings made before the power failure are restored.
Speakon connectors and Speakon cords
To prevent electric shock, do not operate the product with any of the conductor portion of the
speaker wire exposed.
Employ appropriate safety measures when connecting the power cord. When installing or connecting
the product, disconnect it from mains supply. The product mustn‘t be connected to other alternating
voltages and sockets than demanded on the back of the device.