musikelectronic geithain RL901K, Instructions For Installation And Use Manual

Page: 6 / 20

BASIC INFORMATION
4
musikelectronic geithain GmbH RL 901K
4 Basic information
4.1 Guidelines
This product complies to requirements of current European and national guidelines (2004/108/EG
Electromagnetical Compatiblity). The conformity is ascertained, corresponding declarations and
records are deposited with the manufacturer.
Products built by us belong to B2C-class of the WEEE guidelines and must not
be disposed with domestic waste.
4.2 Safety instructions
Like using any other electrical device you should observe the following operation guidelines, safety
instructions and warning signs to ensure optimum functionality and safety of operation!
;
Read these instructions carefully.
;
Keep these instructions during the life cycle at a safe place. The instructions are an important
part of the product.
;
Heed all warnings. Follow all instructions.
;
The product may only be used in accordance with the information provided in the user manual.
Before and during the usage of the amplifier please ensure that all recommendations, especially
the safety recommendations in the user manual, are adhered to.
;
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury, and damage to the product.
;
The heat sink must not be blocked or covered. This product should not be installed unless
proper ventilation is provided or manufacturer‘s instructions have been adhered to.
;
Do not install the device near any heat sources.
;
Do not expose the device to direct sun radiation.
;
Do not install the device in rooms with high humidity.
;
Do not try to insert anything into device openings.
;
The device shall not be exposed to dripping or splashing and no objects filled with liquids shall
be placed on the device.
;
Clean only with dry or slightly moistened cloth.
;
Protect the power cord from being walked on, pinched or damaged in any other way. Pay
particular attention to plugs and the point where they exit the device.