●Ensure that the speaker is charged or has a power connection
and is in on state. ●Ensure that the Bluetooth feature is activated
on your phone. Check that the speaker is within 10m of your
phone and that there are no obstructions between the speaker
and the phone, such as walls or other electronic devices.
●The BT-X56 powers off or does not turn on again could be either
a low battery or a problem with the power supply. Charge the BT-
X56. (We suggest charging the BT-X56 all 2–3 month if it is not
used for a long time.) ●If the speaker has problems to play from
USB sound files, please check the correct formatting of the
sources. They should be formatted in Fat32. The maximum
supported data storage is 32GB. ●The USB port doesn’t support
any external hard disk drive (HDD).
Notes
●Noises are heard from the BT-X56 could be a poor Bluetooth
signal. To avoid noise, stay within the Bluetooth range of ~10m.
●Avoid prolonged exposure to excessive volume that may cause
noise-induced hearing impairment. ●Turn the volume down
before start play with any sound source, then adjust it to the right
volume. ●If the speaker does not turn off or respond please short-
press the RESET jack (12) with a small round pin to reset the
speaker.
Warnings
●Do not disassemble the BT-X56, it may result in short-circuit or
damage. ●Battery warning: Improper use of the battery may
cause fire or chemical burns. The battery may explode in case of
damage. ●Do not modify, repair or remove without professional
guidance. ●Do not use corrosive or volatile liquid for cleaning.
●Do not drop or shake the BT-X56, it may break internal circuit
boards or mechanics. ●Keep the BT-X56 in dry and ventilated
environment. Avoid high humidity and high temperature. Also,
batteries should not be exposed to excessive heat or direct
sunlight. ●Keep the BT-X56 away from little children.
