6
3.0) POWER SUPPLY
The Phonomena II connects to a wall outlet or power strip with the supplied
wall-mount transformer. The unit will not operate without the wall-mount
transformer.
4.0) INPUTS AND OUTPUTS
Please make sure that the volume control on your receiver, integrated amp,
or pre-amp is turned completely down before plugging in the audio
connections. Connect the phonograph cables of your turntable to the inputs
of the Phonomena II, noting proper left and right connections. Attach the
turntable’s ground lead to the ground lug on the rear panel of the unit.
Using a high-quality interconnect cable, connect the outputs from the
Phonomena II to the line-level input of your receiver, integrated amplifier or
pre-amp, again noting proper left and right channels. DO NOT PLUG THE
PHONOMENA II OUTPUT INTO A “PHONO” INPUT. Use the standard LINE IN
jacks, as phono jacks often include special circuitry that is not needed when
using a phonograph preamplifier.
5.0) UNIT PLACEMENT
The Phonomena II may be placed under your turntable if space allows, on a
separate shelf in your audio rack, or on top of another source or line-level
component. Please make sure that ventilation to the unit is not restricted,
and that the unit is away from magnetic fields or noise from other
components’ motors, transformers or displays.
6.0) USING YOUR PHONOMENA II
If you have followed the above instructions, you are ready to play music.
Simply cue down your cartridge on a favorite record, select the correct input
on your receiver, integrated amp or pre-amp, slowly bring up the volume
level, and sit back and enjoy the music.
