on the inside is fine). Allow to dry according to the glue manufacturer's recommendations and
remove clamps.
10)
Once the glue has dried remove clamps. Finally, apply a bead of glue to the
dadoes in the top and port shelf panels. Insert the cover brackets (H) as shown and apply
enough pressure to ensure glue is spread through each joint (some glue squeeze-out can
be expected). Clamp the cover brackets so that even pressure is applied to all glued
surfaces.
11)
With the cabinet together you can now finish to your liking. Don’t forget to finish
the cover panel as well!
12)
Once the cabinet is finished, install the speaker connection of your choice. We
recommend using Speakon connectors for high power applications with 12-14 gauge
cable. With this and the wiring in place, connect the wires to your woofer observing
polarity and install the woofer.
