background image

 
Output : Voltage RMS, maximum > 31.8 Volts 
 Impedance < 47 Ohms 
 Frequency response 10Hz to 40kHz ±0.5dB 
 
Line inputs : 
 
 Total harmonic dist noise, : < 0.005%  (1 Volt output, half volume) 
  20Hz to 20kHz 
 Signal / noise ratio reference : > 93dB ‘A’-weighted 
  1 Volt RMS output 
 Input sensitivity for 1 Volt RMS out : 208mV 
 Input impedance : 47k Ohms 
 Gain at maximum volume : 13.6dB (4.8 times) 
 Overload margin : 35dB 
 Channel separation : > 88dB typical at 1kHz, half volume 
 
 Phono input :  (moving magnet type) 
 
 Frequency response reference 
 IEC RIAA - see graph . . . . 
 
 
 
 
 
 
 
 
 
 Signal / noise ref. 1 Volt RMS output > 70dB (“A”-weighted, at half volume) 
 Input sensitivity for 1 V RMS output 2mV 
 Input impedance 47k Ohms 
 Overload margin 24dB 
 
Input facilities : 3 pairs RCA line level connectors 
  1 pair RCA phono input connectors (moving magnet) 
 
Output facilities : 1 pair RCA audio outputs controlled by the volume, 
  1 pair RCA tape record fixed line level output. 
 
Power requirement : 100 / 115 / 230Volts AC 50 / 60Hz, 5 Watts 
 
Dimensions : 218mm, 8.6 inches wide 
   98 mm, 3.9 inches high (including feet) 
  374mm, 14.7 inches deep (including knob and 
 rear earth terminal) 
 
Weight :  5.8 kg, 12.8 lbs unit only, unboxed 
  7.2 kg, 15.9 lbs in carton 
 
Standard accessories : IEC type mains lead (10-Amp type), 
  Remote control handset (universal type), 
  2 batteries size LR03 or AAA, manganese alkaline type 

 

X-Pre

 

V

 

3

  

SPECIFICATIONS

 

Musical Fidelity reserves the right to make improvements which 
may result in specification or feature changes without notice. 

 

 

PRE  AMPLIFIER

 

INSTRUCTIONS  FOR  USE 

 

Thank you for purchasing the Musical Fidelity 

X-Pre 

V

 

3

 pre-amplifier. 

 

Used properly and carefully, it should give you many years of 

outstanding musical reproduction. 

 

Aesthetically, the X-Pre 

V

 

3

 is a perfect match for the 

X-RAY V

 

3 CD player and X-P200 amplifier. 

Together, they form one of the finest hi-fi systems available. 

 

Dust regularly with a soft cloth or soft brush, but be careful when 

using cleaning or polishing agents - they may harm the surface 

finish. 

 

If you have any questions about your audio system, 

please consult your dealer who is there to help and advise. 

-20.0

-15.0

-10.0

-5.0

0.0

5.0

10.0

15.0

20.0

20.0

31.5

50.0

80.0

125

200

315

500

1000

1600

2500

4000

6300 10000 16000

 RIAA

 PHONO

 RIAA/IEC

 

PHONO  RESPONSE

Frequency (Hz)

dB

 

       X-Pre 

V

 

Page 1 of

 

8       

. 

Issue 1 :  July 2004 

 

 

       Page 8 of

 

8 X-Pre 

V

 

3

       

.

 

Summary of Contents for X-Pre V3

Page 1: ...including knob and rear earth terminal Weight 5 8 kg 12 8 lbs unit only unboxed 7 2 kg 15 9 lbs in carton Standard accessories IEC type mains lead 10 Amp type Remote control handset universal type 2 batteries size LR03 or AAA manganese alkaline type X Pre V 3 SPECIFICATIONS Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice ...

Page 2: ...r with sound quality equal to the most exotic pre amps available We sincerely hope that it will bring you many years of outstanding listening pleasure BEFORE SWITCHING ON See page 4 and 5 for connection details Plug the accessory IEC mains lead into the rear panel socket then the other end into a wall outlet Turn the volume control on the front panel to minimum anticlockwise Page 2 of 8 X Pre V 3 ...

Page 3: ...ifier is muted the red LED on the front panel lights Press the MUTE button again to cancel mute function and the red LED will go out Pressing the volume up or down buttons on the remote handset will turn the motorised volume control in the required direction This action also cancels the mute function If the range of the remote control greatly decreases replace the batteries with new ones Do not mi...

Page 4: ...R O OU UT TP PU UT T OUTPUT RCA sockets are controlled by volume adjustment Connect to the input of your amplifier L LI IN NE E I IN NP PU UT T C CO ON NN NE EC CT TI IO ON NS S Three pairs of RCA line level sockets all have the same input sensitivity They are suitable for use with any source component having an output of at least 300mV The three pairs of sockets numbered 2 3 and 4 correspond with...

Reviews: