Instructions For Use. Page 4
X-P100
INSTALLATION
INSTALLATION PRECAUTIONS
Your new X-P100 is designed and built to provide trouble-free performance but as
with all electronic devices it is necessary to observe a few precautions. Please ensure that
you have complied with them before you connect any AC power to your amplifier. Retain
this guide for future reference.
þ
Heed all warnings on the back of
the unit.
þ
þ
Place your X-P100 where there is
adequate ventilation.
þ
þ
Only connect the unit to a power
supply of the type marked on the back
of the unit.
þ
þ
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
ý
ý
Do not use near water.
ý
ý
Do not place the units near direct
heat sources such as radiators or other
equipment that produces heat.
ý
ý
Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
BEFORE YOU SWITCH ON
You should make all connections to the X-P100 before switching on.
Follow this routine before you listen for the first time, and each time you change any
connections.
1
Check all the inputs and outputs to the X-P100.
2
Then check again.
3
Turn the volume control to nil.
4
Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.
