X-10 V
3
Issue 2 May 2004
Introduction
Thank you for purchasing the X-10 V
3
Tube Output Buffer. We sincerely
hope that it will bring you many years of outstanding listening pleasure.
Installation Precautions
Your new X-10 V
3
is designed and built to provide trouble-free performance,
but as with all electronic devices, it is necessary to observe a few precautions :
n
Do not use the X-10 V
3
near water.
The unit must not be exposed
to dripping or splashing and no objects filled with liquids, such as
vases, must be placed on the unit.
n
Keep the X-10 V
3
away from heat such as radiators.
No naked flame
sources, such as lighted candles, should be placed on the unit.
n
Only use the mains adaptor provided. The use of other adaptors
could seriously damage your X-10 V
3
.
n
Place all connecting cables where they are not likely to be walked on
or trapped by items placed on them.
n
X-10 V
3
will operate in accordance with its specifications within the
following environmental range :
Temperature
5 to 45 degrees Celsius
Humidity
10 to 90% non condensing
This Hi-Fi product has been tested to ensure that its operation is not adverse-
ly affected by normal background levels of Radio Frequency Interference
(R.F.I.), and that it does not itself generate excessive amounts of interference.
However, if a problem persists, please contact your Musical Fidelity agent.
Never open the case of the X-10 V
3
yourself, as this will invalidate the guar-
antee. There are no user adjustments inside. Please refer all service work to
an authorised Musical Fidelity agent.
Connections
All connections should be made before the mains adaptor is plugged in.
Using good quality RCA leads (not supplied), connect the left and right
outputs from your CD player or other audio source to the X-10 V
3
LINE
INPUT sockets. The
LOOP OUTPUT sockets are simply duplicates of
the
LINE INPUT, and are directly connected internally. This is to allow
further connection to other audio equipment if required.
Now connect your X-10 V
3
left and right
OUTPUTS to the CD or auxil-
iary inputs of your amplifier system.
Input from CD player
or other audio source
Optional output to other
audio equipment
AC inlet from
mains adaptor
Connect to amplifier
Plug the AC connector lead from the power supply unit into the X-10 V
3
’s
inlet socket, and plug the power supply itself into a convenient wall mains
outlet. The blue LED on the front panel will light to confirm the unit is
ready for use. Allow a minute or so for the valves (tubes) to warm up, then
sit back and enjoy the music.
This product has been designed so that it may be left on indefinitely, but
please note that the mains adapter may become warm to the touch - this is
normal.
BUILT IN TAIWAN
