background image

SUPERCHARGER 

550K 

MONOBLOCK BRIDGED POWER AMPLIFIER 

INSTRUCTIONS  FOR  USE

 

Thank you for purchasing the Musical 
Fidelity Supercharger 550K monoblock. 
 The Supercharger 550K uses the latest in 
low distortion circuitry in a bridged 
configuration which delivers 550 watts rms. 
 The Supercharger 550K is designed to 
increase the dynamic range of an existing 
lower powered amplifier (from 50 watts to 
200 watts) to 550 watts. The dynamic range 
will increase by up to 10dB. This does not 
necessarily mean that the average listening 
level will be much louder; it’s just that 
musical transients will now be delivered 
without distortion or limiting. Overall the 
listening experience is greatly improved 
because of dramatically lower distortion 
and increased dynamic range.  
 The 550K accepts both speaker level and 
line level inputs. When driven from an 
existing amplifier the sound quality is 
greatly improved because the 550K presents 
an easy load for the existing amplifier to 
drive and at the same time gives up to 10dB 
increase in dynamic range. 
 Alternatively,  the  Supercharger 550K can 
be used as a conventional power amplifier 
driven by a high quality preamp. 
The Supercharger 550K is a perfect answer 
to improve dynamic range in a single 
beautifully engineered package. Used 
properly and carefully, it should give many 
years of outstanding musical reproduction. 
 Dust regularly with a soft duster or soft 
brush, but be careful when using cleaning 
or polishing agents - they may harm the 
surface finish. 
 If there are further questions about any 
Musical Fidelity component, please consult 
the dealer from whom it was purchased, 
who is there to help and give advice. 

 

 

 

Summary of Contents for Supercharger 550K












Reviews: