P a g e
14
Output
voltage
28Vrms
Output
current
1A peak to peak (test conditions only)
Output impedance
<47
Ω
THD+N
< 0.002 % typical, 20Hz to 20 kHz
Signal / noise ratio
>120dB, 20Hz - 20kHz
Gain
2.15x (normal); 4.3x (+6dB enabled); volume maximum
Input impedance
100 K Ohms
Overload margin
24dB
Channel separation
>100dB, 20Hz - 20kHz
Frequency response
+0, -1dB, 5Hz to 100kHz
Connections
Line level inputs
6 pairs line level single ended RCA connectors
6 pairs line level balanced XLR connectors
Line level outputs
1 pair fixed line level single ended RCA connectors
1 pair fixed line level balanced XLR connectors
1 pair variable (pre) line level single ended RCA connectors
1 pair variable (pre) line level balanced XLR connectors
Trigger input and output
3.5mm mono jack socket
Trigger level
±5V to ±12V
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption
<0.5W in standby mode
65W maximum
Weight
Nu-Vista PRE unit only, unboxed
22 kg
Nu-Vista PRE in shipping carton
30 kg
Nu-Vista PRE PSU unit only, unboxed
25 kg
Nu-Vista PRE PSU in shipping carton
34 kg
Maximum Dimensions
Nu-Vista PRE (WxHxD)
483 x 187,5 x 491 (506 with connectors) mm
Nu-Vista PRE PSU (WxHxD)
483 x 187,5 x 475 (478 with connectors) mm
Standard accessories
1x IEC type mains lead
16-Amp type
Remote control
Nu-Vista PRE remote
Batteries
LR03 or AAA, manganese alkaline type 2 off
2x Power cable (1m length)
5-pin XLR
1x Control power cable (1m length)
4-pin XLR
8x Spike Foot
8x Spike Foot Cup
8x Spike Foot Screw
8x Felt pad for Spike Foot Cup
8x Felt pad for Standard Foot
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS
Summary of Contents for NU-VISTA Series
Page 1: ...Installation Guide ...
