6
Troubleshooting
Problem
Probable Cause
Remedy
No power
Power plug is not inserted into
socket correctly.
Plug in securely into unit’s IEC socket.
Excessive hum from
system speakers.
Audio connector plug not fully
pushed in. Cable Fault.
Unsuitable Cable (e.g. cable
grounds not connected).
Insert plug securely. Check cable is connected at both ends. Some
“esoteric” cables have internal wiring intentionally disconnected/modified.
For best results on all inputs, please use good quality screened coax; signal
and screen directly connected both ends.
Amplifier will not
turn on
Power switch not in ON position
Power mode switch in wrong
position
Check the power switch on the back & put it in ON position
Check the power mode switch.
Technical Specifications
Output
Output power
Output power peak
THD+N
Frequency Response
SNR
7x 250W/4 ohms
7x 400W/4 ohms
0,003% at 100W power output
20Hz - 20kHz for 0,5dB
105dB at 1kHz at 200W power output
Connections
Line level inputs
Line level outputs
7 line level RCA
7 line level XLR (balanced)
7 line level RCA through outputs
Power requirement
Mains voltages
Consumption
230V/115V Internally set or 100V optional. AC 50/60Hz
2500W, 0,5W standby
Weight
Unit only, unboxed
In shipping carton & inc. accessories
32,5 kg
ca. 35 kg
Unit dimensions
Wide
High, including feet
Deep (front to back) including terminals
450 mm
195 mm
435 mm
Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.
