Issue 4
Page 13 of
14
SPECIFICATIONS
Output
Power
200 Watts per channel into 8 Ohms (23dBW)
Voltage
45 Volts RMS, 20Hz to 20 kHz; onset of clipping
(126 Volts peak-to-peak)
Current peak-to-peak
45 Amps
Damping factor
170
Output devices
2 pairs per channel
Line input
THD+N
<0.01% typical, 20Hz to 20 kHz
Signal / noise ratio
>100dB ‘A’-weighted
Input impedance
38k Ohms
Frequency response
+0, –0.1dB, 10Hz to 20 kHz
Connections
Line level inputs
1 pair line level XLR (balanced) connectors
4 pairs line level RCA connectors
Line level outputs
1 pair line level RCA connectors, constant level TAPE outputs
1 pair line level RCA connectors, preamp outputs for e.g. biamping
USB input
USB type “B” (square) socket
Speaker outputs
2 pairs 4mm banana plug/binding posts
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption
680 Watts maximum
Weight
Unit only, unboxed
16.6 kg (36½ lbs)
In shipping carton
21.3 kg (47 lbs)
Dimensions
Wide
440 mm (17
⅓
”)
High, including feet
125 mm (5”)
Deep (front to back) including terminals 400 mm (15¾”)
Standard accessories
IEC type mains lead (10-Amp type)
M6 remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
