BLUETOOTH
Issue 2
Page 14 of
42
aptX
®
audio (automatic)
If aptX is available on the
connecting device
, the M6 DAC will automatically implement it for best audio quality.
To check if the connecting device supports aptX
®
please consult the device manuals/support. No user
intervention on the M6 DAC is possible and the setting is entirely
automatic
.
BLUETOOTH BLU
Fixed 44.1kHz aptX
The Bluetooth input is capable of accepting up to 16 bit 48 kHz PCM stereo data streams (aptX
®
to 44.1 kHz).
The incoming data sample rate is accurately displayed on screen for reference.
Caution:
If changing the
Bluetooth link sample frequency
from the transmitting device, e.g. computer, it is
highly recommended to first disconnect/unpair the two Bluetooth devices
before
making the changes. Once the
change has been made, simply reconnect/pair the two devices and carry on using as normal.
Disconnecting Bluetooth device(s)
To disconnect the M6 DAC from the Bluetooth device press and hold the Bluetooth button Until the display
shows
to cancel disconnection press
▼
button or to continue with disconnecting press
▲
.
The M6 DAC will prompt if the device it to be “Forgotten” or not. This is best used to forget devices that are not
likely to be used again with the M6 DAC. Up to 16 devices can be remembered so there is plenty of space for
different devices under normal use.
Press
▼
to cancel forgetting device (i.e. remember it) or
▲
to forget the device. Forgetting the device briefly
shows
Device removed
Forget this device?
Yes:
▲
No:
▼
Device disconnected
Disconnect device?
Yes:
▲
No:
▼
before returning to the Bluetooth input screen.
BLUETOOTH BLU
Fixed No Link
To “forget” all stored Bluetooth devices, press and hold the Bluetooth button when the above screen is
displayed.
Yes:
▲
No:
▼
Forget all devices?
Press
▼
to cancel forgetting devices or
▲
to forget all the devices. Forgetting the devices briefly shows
All devices removed
before returning to the Bluetooth input screen.
