M3i manual issue 1
Page 12 of
13
SPECIFICATIONS
Output
Power
76 Watts per channel into 8 Ohms (19dBW)
Voltage
25 Volts RMS, 20Hz to 20 kHz; onset of clipping
70 Volts peak to peak
Current
25 Amps peak to peak
Damping factor
36
Output devices
1 pair per channel
Line input
THD+N
< 0.014 % typical, 20Hz to 20 kHz
Signal / noise ratio
> 96dB ‘A’-weighted
Input impedance
40 k Ohms
Frequency response
+0, –0.1dB, 10Hz to 20 kHz
Connections
Line level inputs
6 pairs line level RCA connectors
Line level outputs
1 pair line level RCA connectors, constant level TAPE outputs
1 pair line level RCA connectors, preamp outputs for e.g. biamping
Speaker outputs
2 pairs 4mm banana plug/binding posts
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption
320 Watts maximum
Weight
Unit only, unboxed
9.2 kg (20¼ lbs)
In shipping carton
13 kg (30
⅔
lbs)
Dimensions
Wide
440 mm (17
⅓
”)
High, including feet
100 mm (4”)
Deep (front to back) including terminals 400 mm (15¾”)
Standard accessories
IEC type mains lead (10-Amp type)
M3i remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
