Connections
All connections must be made before the mains
adaptor is plugged in and before any amplifier
connected is switched on. Always switch off
the equipment attached to the LX
2-LPS before
connecting/disconnecting power, changing
leads or inputs. This is to prevent loud noises
being put out through the speakers.
Inputs
Using good quality RCA leads (not supplied),
connect the left and right turntable outputs to
the correct LX2-LPS INPUT sockets.
Use the phono MM input for moving magnet
cartridges. Fit your loading plugs if required.
Use the phono MC input for moving coil
cartridges. Fit your loading plugs if required.
Outputs
Connect the LX2-LPS left and right OUTPUTS to
the desired LINE LEVEL (e.g. AUX) inputs of the
amplifier system.
Power
Plug the DC connector lead from the power
supply unit into the LX2-LPS power inlet socket,
and plug the adaptor into a convenient wall
mains outlet. Switch on the unit, and the
statusLED next to the power switch will light to
confirm the unit is ready for use. Now select the
MM/MC input to match.
Enhanced power supply
(sold seperately)
For optimum performace you can connect the
Musical Fidelity enhanced power supply (EPS).
When connected the EPS LED will light to
confirm that both units are ready for use.
Earthing
An earth terminal is provided. Optimum earthing
arrangements differ according to setup
Connect earth wire from turntable to this
terminal if hum is apparent.Some setups may
work perfectly if this terminal is not connected
and there is no harm in leaving it disconnected.
Use
This product has been designed so that it may
be left on indefinitely, but please note that the
mains adapter may become warm to the touch
- this is normal.
Turn the volume on the amplifier to normal
listening levels, sit back and enjoy the music.
12V - 24V DC
DESIGNED IN ENGLAND
BUILT IN TAIWAN
MM / MC PHONO AMPLIFIER
MC INPUT
MC LOAD
MM INPUT
MM LOAD
L
R
OUTPUT
MM
POWER
ON
OFF
EPS
MC
SELECT
