Tri-Vista Pre Instructions for Use Page 6 of 11
REMOTE CONTROL
REMOTE CONTROL
Buttons on the remote control enable main functions of the preamplifier to be operated from a
convenient distance.
Before use, batteries must be fitted. Two are required, size LR06 or AA, manganese alkaline
type such as MN1500. These go into separate compartments along the right-hand edge of the
control by first removing the twist-off covers with a suitable coin. Insert each battery with the
positive (
+
) pip terminal facing outwards, and then replace the cover.
If the range of the remote control greatly decreases, replace the batteries with new ones.
Caution - when removing batteries, the battery compartments are spring-loaded.
Do not mix old and new batteries, and do not dispose of used batteries in a fire.
Equivalent buttons on the remote handset have the same functions as the those on the front
panel of the unit.
As the remote control uses an invisible infra-red light beam, the transmitter should be pointed
directly towards the receiver window on the front of the pre-amplifier, without visual obstruc-
tion between them.
Pressing the volume-up or -down buttons on the remote handset will advance the motorised
volume control in the required direction.
Pressing the
MUTE
button mutes audio output from the LINE-OUT sockets, but has no effect
on the TAPE OUT sockets for recording. To show that the line output is muted, LEDs in the
illuminated feet will change from their current colour to red. Press the
MUTE
button again to
cancel mute function, and the feet LEDs will revert to their previous colour (see page 8, under
“Starting”).
Issue 1: April 2003
CD
input select
SACD
input select
TAPE
input select
AUXILIARY
input select
VOLUME
(UP)
VOLUME
(
DOWN
)
PHONO
pickup
input select
TUNER
input select
RIAA / IEC
pickup compensation
(see page 9)
DISPLAY
brightness adjustment
(see page 9)
TAPE MONITOR
(
see page 8)
MUTE
button
