CD - SPECIAL FEATURES
If at any time you make a mistake or wish
to delete a track from the list, press the
CLEAR
button to erase the last step.
Repeated pressing of
CLEAR
will then
erase each step in reverse order.
If you wish to check the selection before
playing back your program, the
CHECK
button can be pressed to step through each
track in turn. At the end of the check
sequence, the display briefly shows:
To play the programmed tracks press
PLAY/PAUSE
(or
INTRO
if required,
see page 14).
When all programmed tracks have been
played, the CD player stops. The same
track selection can then be played again by
pressing the
PLAY/PAUSE
button.
To cancel this mode, press
PROGRAM
.
The word CONTINUE then briefly replaces
track, index and time display.
Note: The entire program contents will be
cleared if you open the disc compartment to
load another disc, but this does not cancel
program mode itself.
AUTOSPACE
The CD Pre’s AUTOSPACE function can
be used to insert 4-second silent spaces in
between each track as it is played back.
This can be useful when making cassette
recordings of CDs. Some cassette
recorders feature a track skip or search
function which uses the silent gap between
tracks to locate each one individually.
However, some CDs do not have long
enough gaps between tracks for this function
to operate properly.
AUTOSPACE can solve this problem.
Pressing the
AUTOSPACE
button once
activates the function. The legend
AUTOSPACE
will appear in the display. In this mode,
once the CD Pre has reached the end of a
track the
AUTO SPACE
graphic will begin to
flash and the elapsed time part of the display
will change to count down from four sec-
onds to zero before play of the next track
begins.
When zero is reached the
AUTO SPACE
legend
stops flashing and play continues at the start
of the next track.
Press
AUTOSPACE
again to cancel this
mode.
DISPLAY
The CD Pre’s display can be switched off
with the
DISPLAY
button on the remote
control
when a disc is playing
.
However, if the button is pressed without a
CD being loaded, or with a disc stopped,
track, index and time displays are briefly
replaced by the word DISPLAY OFF to con-
firm this mode has been engaged,
but the
display remains lit until play is selected
.
Pushing the button a second time briefly
shows DISPLAY ON to confirm that the
function has been cancelled.
When in display-off mode, pressing any but-
ton will cause the display to return briefly to
confirm the new status before again switch-
ing off.
CD Pre
Instructions for Use. Page 15 of 19
Issue 1: January 2002
