A1008 CD
CD SPECIFICATIONS
Issue 1: 17
th
April 2007
Page 16
of
17
Pre-out impedance
50 Ohms
DAC:
DAC circuit
24 bit Delta-Sigma (Bit stream) dual differential 8X over sampling
Total correlated jitter
< 135 pS
< 0
.
1dB down to -96dB
Linearity
2
.
18VRMS at 1 kHz nominal
Output digital 0dB level
10Hz to 20 kHz -0
.
2dB max
Frequency response
Channel separation
> 105dB 20Hz to 20 kHz
Signal / noise ratio
> 117dB “A” weighted
< 0
.
003% 10Hz to 20 kHz
Total harmonic distortion
Connections:
Line level outputs:
1 pair RCA Valve outputs
1 pair RCA Solid state outputs
Digital outputs
1 S/PDIF (RCA connector)
1 optical (TOSLINK)
Power requirement:
100 / 115 / 230Volts AC
50 / 60Hz (factory pre-set),
22 Watts maximum
8 Watts idle
Standard accessories:
A1008 Power supply lead
1.0 m
39 ¼ inches
1 off
Mains lead
10 Amp IEC type
1 off
Mains lead
Remote control
A1008, universal
1 off
Remote control
Batteries
Size LR03 or AAA
manganese alkaline type
2 off
Batteries
Dimensions:
Main
unit
440
mm
17
⅓
inches
wide
170 mm
6¾ inches
high inc. feet (clamp closed, 255mm [10 inches] minimum clearance required to open)
385mm
15¼ inches
deep inc. terminals
Weight:
10.1 kg,
22¼ lbs
Unboxed
12.6 kg
27 ¾ lbs
Boxed unit including all accessories
Musical Fidelity reserves the right to make
improvements which may result in specification or
feature changes without notice.
