Congratulations on purchasing the Contralto Bluetooth Soundbar.
It’s designed primarily for fitting in a kitchen plinth, but is equally happy in other furniture.
Mounted vertically in a 150mm kitchen spacer unit (base or wall)
Mounted in the rear of a wall unit playing down at the work surface
Bathroom vanity cabinet (Plinth, or mounted under an open unit)
Bedroom or living room furniture.
WHAT’S IN THE BOX
1
Soundbar
complete with
removeable front grill
Steel fixing trim (attached to the soundbar)
2
Fixing screws (6)
Packed in power supply box
3
Power supply 240 / 15v
Fits UK 3 pin socket
4
Bolt for rear height support
Packed in power supply box
5
Remote control
6
Batteries for remote control
Packed in power supply box
7
Installation cutout template
SAFETY
The Soundbar is designed to be installed in furniture.
It is suitable for indoor use only.
If installed in a bathroom then it must be in Zone 2 or outside zone. It must not be installed in
Zone 0 or Zone 1. The bathroom should be ventilated.
It is not suitable for saunas, steam rooms or shower cubicles.
UNPACKING
Carefully remove the soundbar from its packing box and support foam.
The front grill is pressed onto studs, slip your fingers behind the plastic trim and gently ease
free from the case.