
Operation
1.
Make sure the discharge tube is placed into a glass or bottle.
2.
Using the supplied brush clean off any lose dirt or dust from the record.
3.
Place the record on the deck and screw down the record clamp until the rubber
seal is securely over the record label.
4.
Switch on the rotation and apply the cleaning fluid to the record surface. Use
the brush to apply a fine film over the record. Gently hold the brush on the
grooves during rotation.
5.
Turn the suction arm so that it is over the record and then turn on the vacuum.
6.
Allow the suction arm to remove the fluid and dirt from the record surface.
When dry, switch off the vacuum and turn the suction arm away from the
record.
7.
Unscrew the record clamp and make sure it is clean and dry.
8.
Repeat steps 1-6 when preparing to clean and cleaning the reverse side of the
record.