Getting Started
Thank you for purchasing the Music Hall cd15.2 compact disc player. It is
assembled using hand selected parts, a precision CD transport and a Burr Brown
PCM1739 24bit/192Khz DAC. These combined features guarantee that the cd15.2
will deliver the highest level of audio performance. When used in a top-end audio
system, your music hall cd player will provide years of enjoyment. The cd15.2 is
the perfect complement to Music Hall's a15.2 integrated amplifier.
A Few Precautions
Please read this manual carefully. In addition to installation and operating
instructions, it provides valuable information that will help you get optimum
performance from your system. Please contact your authorized Music Hall dealer
for answers to any questions you might have. In addition, all of us at Music Hall
welcome your questions and comments. Save the Music Hall cd15.2 shipping
carton and all enclosed packing material for future use. Shipping or moving the
cd15.2 in anything other than the original packing material may result in severe
damage that is not covered by the warranty. Be sure to keep the original sales
receipt. It is your best record of the date of purchase, which you will need in the
event warranty service is required.
Placement
Use common sense when placing the cd15.2. Always place the cd player on a
level, firm surface. Make sure that the shelf or cabinet can support its weight. Do
not stack heavy components on top of the cd15.2. Avoid placing the unit where it
may be subject to excessive heat, such as on top of a large power amplifier or near
a heat register. For best performance, avoid placing the unit where it may be
subject to vibration, such as near a speaker.
Connecting to Other Equipment
Interconnect Cables
An interconnect cable is supplied. Upgrading this cable to one of higher quality
may or may not improve the sound quality of the cd15.2.
Audio Output
These outputs are located on the back of your cd15.2 and are labeled Stereo
Output. Connect these outputs to your amplifier's cd input using the supplied
cable. Match the Red interconnect lead to the R-Stereo Output and the Black
interconnect lead to the L-Stereo Output.
Digital Outputs
Optical
Use this output to connect to an optical digital input. A suitable optical cable must
be used.
Coaxial
Use this output to connect to a coaxial digital input. A suitable 75 ohm screened
cable should be used. Never connect the digital output socket to a conventional
audio input.
Connecting to the Mains
Plugging In
Check that the
power
button on the front of the unit is in the
off
position. Push
the plug (IEC line socket) of the power cable supplied with the cd15.2 into the
socket (POWER INPUT) on the back of the unit. Make sure it is pressed in firmly.
Plug the other end of the power cable into an AC wall outlet.
A triangle with a lightning symbol draws the user's attention to
"dangerous voltage" without insulation in the cabinet which may
be high enough to entail a risk of electric shock.
A triangle with an exclamation mark draws the user's attention to
important instructions for use and maintenance in the
accompanying manual, which should be studied.
-
5
-
-
4
-
CAUTION:
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or bypassed.
Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside
the player, leave all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or moisture.
3. Do not touch the power cord or plug with wet hands.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE.REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
