AC IN
AC IN
FUSE: T5AL/~250V
FUSE: T5AL/~250V
SPEAKER OUT
SPEAKER OUT
LEFT
RIGHT
PRE OUT
PRE OUT
~230V
~115V
VOL
T
AGE
S
ELECT
O
R
VOL
T
AGE
SELECT
OR
REC OUT
REC OUT
TAPE IN
TAPE IN
AUX
TUNER
CD
PHONO
GND
CARTRIDGE
MM
MC
L
Designed and developed in the USA
a
50.2
a
50.2
MODEL:
SERIAL NO.:
R
Please read this manual carefully. In addition to installation and operating instructions, it
provides valuable information that will help you get optimum performance from your system.
Please contact your authorized music hall dealer for answers to your questions. In addition, all
of us at music hall welcome your questions and comments. Save the shipping carton and all
enclosed packing material for future use. Shipping or moving the unit in anything other than
the original packing material may result in severe damage that is not covered by the warranty.
Be sure to keep the original sales receipt. It is your best record of the date of purchase, which
you will need in the event warranty service is required.
4
Placement
A Few Precautions
integrated amplifier
integrated amplifier
Use common sense when placing the a50.2. Always place it on a firm, level surface. Make
sure that the shelf or cabinet can support the weight. Ensure that there is adequate ventilation
around all sides of the unit. Avoid placing the a50.2 where it may be subject to excessive heat,
such as near a heat register. Do not place anything on top of it. For best performance, avoid
placing the a50.2 where it may be subject to vibration, such as near a speaker.
Connecting Source Components to the a50.2
The a50.2 has 4 analog inputs, one tape loop, and one phono input.
Left Speaker
Right Speaker
