Baby Reference Preamplifier user manual
Troubleshooting
Symptom
Problem
Solution
No Sound
No source playing/ selected
Ensure the source is playing
Ensure the correct source is
selected
Pre amplifier level too low/ off
Turn up the level control on the
Reference Preamplifier
Amplifier not on/ level too low
Ensure the amplifier is on and
any volume control is up
Loud “buzzing or “humming”
sound
Ground selector incorrectly set
Check that the grounding
switches are correctly set (see
“The grounding switches”)
For any further advice, please contact us at
WARNING
•
In no event shall the manufacturer be liable for any damage, direct, indirect or
consequential of any type or any expenses or losses resulting from the use of this product.
•
Contains no user serviceable parts, refer servicing to qualified personnel only.
•
Do not expose the unit to moisture, excessive heat or cold.
•
The contents of this manual are correct at the time of going to press. The manufacturer
reserves the right to change the specification and features without prior notice.
7
