Music & Lights SMARTDISK, User Manual

Page: 27 / 36

9
SMARTDISK
3.5 DMX ADDRESSING
To be able to operate the SMARTDISK with a light controller, set the unit DMX start address for the first
DMX channel. To set the start address refer to following procedure:
• Use the UP/DOWN button until the display reads [DMX Address] and then press the ENTER button to
confirm
• Press the UP/DOWN button to select the value [
d 1-509]
and then press the ENTER button
.
If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel, adjust
the start address 33 on the SMARTDISK.
The other functions of the light effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown in the page 13.
DMX
Channels
number
Start address
(example)
Busy DMX
address
Next possible start address
for unit n°1
Next possible start address
for unit n°2
Next possible start address
for unit n°3
4 33 33-36 37 41 45
3.6 DMX MODE
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the DMX Address and press the ENTER key.
• Press the arrow keys to select the desired value ( 001-512 ).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
4 channels DMX configuration example
ð
Effect .......
ð
Speed 0~100
Background
Foreground
ð
Static Preset
ð
Side
ð
black,red,deep
orange, light
orange, yellow,
green, sea green,
acquamarine,
cyan, blue, violet,
purple, magenta,
white, white all,
warm white, cold
white
ð
Top
ð
Manual Color
ð
Side
ð
Red (0 - 255)
ð
Top Green (0 - 255)
Blue (0 - 255)
White (0 - 255)