Music & Lights PROLIGHTS WIZARD, User Manual, Page: 27 / 40

9
WIZARD
3.3 THE MAIN INTERFACE FUNCTION DESCRIPTION
DESCRIZIONE
The left and right rotary cursor to select up and
down or left and right menu selection
Pressed in to confirm the selection
Press it by 2 seconds, to jump into the main
menu, return to the previous level
Show the current operating mode
The currently open folder name (A:\directory in the SD card)
File type icon:
Graphic, file folder
Ild format
Show the current scanner speed
Showing the currently selected file or folder name
The total number of files in current directory and select
several files
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (230 V~/50 Hz). Switch on the WIZARD with the mains switch
(13). To switch on the laser beam, connect the supplied key to the lock of the switch (19) and turn the key
to position ON. When laser is powered on, LCD monitor on rear panel shows the current operating mode.
Then the unit is ready for operation and can be operated via a DMX controller or it independently per-
forms its show program in succession.
WARNING - This laser corresponds to the class 4. Do not permit operation by persons not qualified for
operating the device.
• Regular breaks during operation are essential to maximize the life of this device as it is not designed
for continual use.
• Do not switch the unit on and off in short time intervals.
• Always unplug the unit when it is not used for a longer time.
• In the event of serious operation problems, stop using the fixture and contact the manufacturer di-
rectly.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the LCD Display
(fig.5).