Music & Lights ProLights Tribe LUMI4COMPAQ, User Manual

Page: 21 / 28

7 LUMI4COMPAQ
3.3 MENU STRUCTURE
MENU
1
DMX mode and
Starting Address
A001
ð
A001 - A512 Selects DMX mode and DMX starti ng value
2
Auto programs and
programs speed
AP01
ð
AP01 - AP12 Select auto program mode
F.00 - F.08 Sets auto program speed (static - slow to fast)
3 Manual mode CoLo
ð
r.00 - r.08 Intensity of Red (r.00 = off, r.08 = brightest)
g.00 - g.08 Intensity of Green (g.00 = off, g.08 = brightest)
b.00 - b.08 Intensity of Blue (b.00 = off, b.08 = brightest)
F.00 - F.08 Strobe speed (static - slow to fast)
4
Sound Active and
Sound Sensitivity
Souo
ð
SP00 - SP03 Increase 4 possible audio sensitivity
5 Obey3
Ob-3
3 channel dmx only RGB
3.4 AUTO SHOW
This fixture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows AP01 , then press the button ENTER.
• Use the button UP/DOWN to select the desired auto program AP01 - AP12 , then press the button ENTER.
• Use the button UP/DOWN to select the auto programs speed F.00 - F.08 (Static, Slow-Fast), then press the
button ENTER.
3.5 SOUND MODE
In music mode, via its integrated microphone, the unit can be controlled by music with a clear rhythm in
the bass range. If the music control should not work optimally, increase the volume or reduce the distance
between the sound source and the light effect unit.
• Press the button MENU so many times until the display shows Souo.
• Press the button ENTER to confirm.
• Using the button UP/DOWN, select the desired microphone sensitivity value SP00 - SP03.
• Press the button ENTER to confirm.
3.6 MANUAL MODE
This mode allows to set the brightness color balance: (r, g, b) .
• Press the button MENU so many times until the display shows CoLo , then press the button ENTER.
• Select the color r, g, b through the buttons UP/DOWN, then press the button ENTER to confirm.
• Using UP/DOWN button, select the desired color brightness value 00 - 08.
• Press ENTER button to confirm.
• To set the strobe effect, press the button MENU so many times until the display shows CoLo , then press
the button ENTER.
• Using UP/DOWN button, select F.00 , then press the button ENTER to confirm.
• Use UP/DOWN button to set the speed of strobe effect F.00 - F.08.
• Press ENTER to confirm.