9
PIXPAN16
Info
Auto test
Fixture Hours
Version
DMX MODE
DMX address
001 - 512
DMX CHANNEL
DMX channel
3 Ch
5 Ch
7 Ch
48 Ch
MASTER/SLAVE
Master/Slave
Master
Slave
WHITE BALANCE
Balance
R=0-125
G=0-125
B=0-125
FAN SPEED
Fan Speed
Auto
High
TEMPERATURE
Temperature
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
•
Press the button MENU so many times until the display shows [
AUTO SHOW
], then press the button ENTER.
•
Press the button UP/DOWN to switch between the programs (
AUTO 01 - AUTO 12
or
FADE
). The unit will
operate in automatic mode.
NOTE - Programs
AUTO 01 - AUTO10
are fully pre-programmed and will not be altered by changes in EDIT
mode.
3.5 MASTER/SLAVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
•
Press the button MENU so many times until the display shows [
MASTER/SLAVE
], and press the button
ENTER to confirm.
•
Press UP/DOWN to set the unit as [
SLAVE
].
•
Select the desired program (see section 3.4).
•
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture (see page 11).
Summary of Contents for ProLights PIXPAN16
Page 1: ...IT EN MANUALE UTENTE USER MANUAL PIXPAN16 PROFESSIONAL RGB FC COB LED...
Page 21: ......
Page 43: ......
