ECLIPSEFRESNELJTU - DY
12
3.7 DIMMER MODE
• Enter in Dimmer mode to select specific dimming curve, press the ENTER button to access the main
menu.
• Press the UP/DOWN keys to scroll the menu, select the
Advanced
icon, then press the ENTER button to
enter the next menu.
• Press UP/DOWN to scroll through the menu, then select
DIM MODE,
and press the button ENTER to con-
firm.
• Press the button UP/DOWN to select
OFF - DIM1 - DIM2 - DIM3.
• Press ENTER button to store.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.8 LED FREQUENCY
• To adjust the frequency of the LEDs, press the ENTER button to access the main menu.
• Press the UP/DOWN keys to scroll the menu, select the
Advanced
icon, then press the ENTER button to
enter the next menu.
• Press UP/DOWN to scroll through the menu, then select
LED Frequency,
and press the button ENTER to
confirm.
• Select the frequency
(600Hz - 1200Hz - 2000Hz - 4000Hz - 6000Hz - 25kHz)
using the UP/DOWN buttons.
• To confirm, press the ENTER key.
• Press the MENU button repeatedly to exit the menu and to save the changes made..
3.9 FANS MODE
Select this function to set the fans operation mode:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Advanced
, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Fans Mode
, and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select Auto/On, press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made..
3.10 FACTORY RELOAD
Selezionare questa funzione per ripristinare l’unità alle impostazioni di fabbrica:
• To activate
Reset Factory
display press the ENTER button to access the main menu.
• Press the UP/DOWN keys to scroll the menu, select the
Advanced
icon, then press the ENTER button to
enter the next menu.
• Press UP/DOWN to scroll through the menu, then select
Factory Reload,
and press the button ENTER to
confirm.
• Press the MENU button repeatedly to exit the menu and to save the changes made.u.
3.11 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon
Information
, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
